The VNX Unified Storage platform is very flexible storage platform. However, there are many moving parts to the VNX. There may be times that due to changes in the business, that you need to make changes to the configuration of the array. It is a good practice to follow to have a documented trail of what the configuration of the frame was before you start the activity as well as what you have done after you completed the activity. Though Unisphere, data gather has been simplified, but there are times that the GUI is not an option. There are use cases when data gathering must be done via command line, such as Java issues, network port blocking, or a slow connection which would make the GUIs unreasonable to operate.
First off, you will need to log into the control station as ‘nasadmin’ or equivalent user account. To run the script to gather data about the File in a “collect_support_material,” you just need to run a single command.
No parameters are needed for simple execution of the built-in script.
This script will run for a few minutes, depending on how much configuration you have done to your VNX. This is non-disruptive and causes minimal impact to your environment since most of the commands are ran against the control station; not the data movers or luns.
The result is a zip file that has all of the file configuration output. It resides on the control station still, so you will want to copy the file down to your local workstation. This can be done easily with WinSCP, FileZilla, or some other SCP file transferring tool.
The file location will be displayed at the bottom of the script. In newer versions of the VNX File code, it is located in /var/tmp/, but previous versions of DART placed it in /nas/var/emcsupport/.
Regardless, the on-screen output will display where the Support Materials file is located and its filename.
Once you have the file, it is a standard zip file that you can extract the data from. Looking into the file, you will see a directory named “cmd_outputs” which will contain all of the commands on the VNX File’s output listed here.
For Example, if you wish to see the file systems on this nas, you can look in the “nas_fs –list” file. If you would like to see how much space you have left in your storage pools, you can look in “nas_pool –size”.
There is also a block collect that you can get called a SPCollect. Again, there are numerous ways to get this report, but keeping the theme of CLI commands, I will show you how to collect it from the Control Station.
Simply run the command /nas/tools/.get_spcollect
This will run out and gather the SPCollects from the Service Processors themselves and zip them up into a single file that will contain both SPA and SPB, called SPCOLLECT.zip. This file will also be stored on the VNX Control Station, which you can then SCP down to your local workstation.
Lastly, we are able to gather up the VNX File Support Materials and Block SPCollects in a single step.
Run /nas/tools/collect_support_materials –getsp and during the collection process, the script will also execute the SPCollects and add them to the zip file. Obviously, this will take a bit longer, depending on how long it will take your SPs to do their own collects. However, this single file will have all of your VNXs configuration data. You can then use this file to document the status of the array at that time, plan your migration, or document the work you already did on the VNX.